Factory Direct Saves Over "Known" Brands Since 2003

Factory Direct Saves Over "Known" Brands Since 2003

Factory Direct Saves Over "Known" Brands Since 2003

InwallTech® Atmos Ready –The Mt Tabor 514

Compare at: $2,895.00

Sale Price

$2,125.00
Kit

Availability: Usually ships same day before
3 Eastern Time!

Sale Price

$2,125.00
Kit

Availability: In stock

Ultimate High Performance Audiophile Loudspeakers

Premium, luxury, preeminent, supreme, unparalleled, paramount, primo, leading, first-class, finest, precious, life-like, extravagant, etc.

Get ready because you’re looking at the most performance you can get out of an inwall design before paying exotic prices. This line delivers luxury fulfillment of life-like audio reproduction. Envision a home theater capable of immersing you into the true embodiment of the movie director’s dream.

Features:

  • Exceptional low end fidelity for the most intense musical or theatrical pieces created by Provlar™ woofers. Our improved version of Kevlar, introduced in 2010.
  • Vivid high end and unassuming midrange performance for greater accuracy and more life-like imaging, taming the shrillish properties of typical Titanium with Zelenium-Dome™tweeters. Our improved version of Titanium, also introduced in 2010.
  • Easy one-cut, drop-in installation puts built-in audio within reach, with Exact Fit templates and a precision flange that clamps the speaker securely to the drywall.
  • Get a lifetime of reliable sound from the durable, CAD (computer aided design) modeled, injection-molded butyl rubber surrounds suppress unwanted cone resonances.
  • Enjoy greater accuracy and more realistic imaging with aiming tweeters that pivot independently.
  • Timbre matching (the family of speakers sound the same) ensuring utterly seamless blending from speaker to speaker. They are acoustically inert, for dynamic, unimpeded sound and more uniform coverage, even in larger rooms with nearly transparent, ultra-small perfs
  • Practically invisible once installed with the magnetically attached exclusive wafer-thin Rarefied-Grille™
  • Visualize an even more hidden look by painting the grill and frame of the speakers for a nearly invisible installation.

InwallTech HD650W 6 1/2" Kevlar Inwall Speakers

Recommended Subs


“Finally, our
flagship line of speakers are here! This HD line of speakers are very
good….and very good for the price. We should sell these for more, but
we can’t in good conscience. Factory direct from a strong retailer is
your best bet these days…no middle-man”

Brian Kruse
Inwallstore.com

Industry Comparison:

InwallTech® HD650.2W B & W® CWM 664

See on ABT.com
Inwallreviews.com

Index Score:
91
$379 pr.

Inwallreviews.com

Index Score:
83
$550 pr.

This comparison illustrates InwallTech’s principles of making the most of materials available to get audiophile quality keeping pricing at affordable levels giving you the most purchasing power when shopping for inwall speakers.

Installation Tip for Starting Dog Ear Mounting

HD525.1LCR (1 — center speaker)

– LIFETIME WARRANTY
– Trimless Grill. Exclusive wafer-thin Rarefied-Grille™ 4mm
– Woofer: Dual 5.25″ Provlar-Woofers™ (our new improved version of Kevlar), butyl rubber surround, 18 oz magnet, 1.
25″ voice coil, video shielded

– Midrange: 3″ Provlar-Woofers™, butyl rubber surround
– Tweeter: Dual 1″ Pure Zelenium-Dome™, Ferro-fluid cooled, Neodymium magnet Swivels 30 degrees
– Crossover:
Phonalic PCB board, 12dB woofer section, 12dB tweeter section


Polyimide switch-auto protect reset switch, over power protection

– Overall Frequency response: 40 Hz- 26,500 Hz (+ – 9db)

– Low Frequency limit -3db: 60Hz

– Upper Frequency limit -3db: 25,000Hz

– Sensitivity: 89dB at 1W/ 1M

Maximum Thermal Rating: 150 watts

– Impedance: 4 or 8 ohm selectable
– Overall
Dimensions: 13 7/8″ W x 9 7/8″ W x 3 1/2″ D Will fit horizontally between
standard stud width

– Cut out dimensions: 12 3/4″ W x 8 7/8″ H x 3 1/2″ D (It’s advised to NOT cut your opening until
you have the speakers in hand, a template is included with the speakers)

HD650.2W (4 each)

-LIFETIME WARRANTY

-Trimless Grill. Exclusive wafer-thin Rarefied-Grille™ 4mm
-Woofer: 6 1/2″ Provlar-Woofers™ (our new improved version of Kevlar) with butyl rubber surround, 1″ voice
coil, 22 oz. magnet with vented pole piece

-Tweeter: 1″ Pure Zelenium-Dome™ pivots 30 degrees, ferro-fluid cooled, neodymium magnet,
wide dispersion design

-Crossover: Phonalic Heavy Duty Reinforced PCB
board, independent 12 db woofer section, 12 db tweeter section,
Polyimide auto protect over power reset automatic switch, Gold plated
terminal posts will accept up to 14 AWG wire.

– 3/ 0/ +3 db
attenuation switchs for independent tweeter and woofer control

-Impedance:
Switchable 4 or 8 ohm

-Sensitivity: 89 db measured with 1 watt / 1
meter away

-Maximum Thermal Power Rating: 125 Watts
-Overall Frequency response: 40 Hz – 30,000 Hz (+ – 9db)

-Low Frequency limit -3db: 50Hz

-Upper Frequency limit -3db: 25,000Hz

-Dimensions: 12 1/8″ x 8 3/4″ x 3 1/2″
-Cut out dimensions: 11″ x 7 1/2″ (It’s advised to NOT cut your opening until
you have the speakers in hand, a template is included with the speakers)

HD650.1A (4 each)

-LIFETIME WARRANTY
-Speaker Assembly: Mounted in 20 degree angled housing
-Trimless Grills. Exclusive wafer-thin Rarefied-Grille™ 4mm
-Woofer: 6 1/2″ Provlar-Woofers™ (our new improved version of Kevlar) with butyl rubber surround, 1″ voice coil, 22 oz. magnet with vented pole piece
-Tweeter: 1″ Pure Zelenium-Dome™ pivots 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersion design
-Crossover: Phonalic Heavy Duty Reinforced PCB board, independent 12 db woofer section, 12 db tweeter section, Polyimide auto protect over power reset automatic switch, Gold plated terminal posts will accept up to 14 AWG wire.
– 3 db attenuation switch for independent tweeter control
-Impedance: 8 ohm
-Sensitivity: 89 db measured with 1 watt/ 1 meter away
-Maximum Thermal Power Rating: 125 Watts
-Frequency Response: 45 Hz – 20,000 Hz
-Overall Dimensions: 9 3/8″ x 5 1/4″
-Cut out dimensions: 8 1/4″ (It’s advised to NOT cut your opening until
you have the speakers in hand, a template is included with the speakers)

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information:

You may also like…

CUSTOMER REVIEWS

Reviews

There are no reviews yet.

Be the first to review “InwallTech® Atmos Ready –The Mt Tabor 514”

Find Sub Component Reviews

If you're looking at a kit, there will be more reviews to consider with the individual pieces. Find more here....